Doing some more research on a variety of these emulators, there appear to be several methods in use to encode the different disks.Doing some research it looks like the USB stick must be formatted to look like a floppy disk to the machine Then there are two buttons and a 0 to 99 readout on the emulator that you pick what program number you want to load I am NOT good at all with computer stuff, Ive tried online to format the usb but Im getting no where.
Floppy To Usb Emulator Software Code The DifferentFloppy To Usb Emulator Software How To Format TheIf anybody could walk me through how to format the usb then load a program that would be awesome. Turn the VF3 off. Then, with the USB stick plugged in, hold one of the buttons down (I forget which one) and turn the machine back on. Tried every combination of buttons and turning it on and off. So I converted it back to a floppy drive and it works fine now. I had a bunch of old programs on floppys from my old job and they load great. I do have a new program a guy wrote me yesterday that wont load but there must just be something wrong with the post or something Slowly getting this figured out and hope to make some chips SOON Thanks to all those that tried to help. The Program I use to format the USB is called CNC Floppy Emulation Manager Tool V3.500. Its also used to put the files on to the USB. It formats the floppy to act like there are numerous floppy disc spaces on the USB, that is what the numbers correlate to. When I load a program on to the USB I tell it to go to space 01. Hope this clears it up, it took me a while but it was well worth it. If you have a larger drive (32gb), it is most likely formatted for NTFS. The easiest thing to do in that case is just buy a smaller one (should be less that 10). It sounds like anything over a gig should be more than your system can use anyway. If you have a drive you like and want to reformat it for FAT and give up the extra space, there are utilities for that too. Floppy To Usb Emulator Software Software In OrderHere is a link showing the technical implementation of how the data is stored on a generic one: Review: Unbranded 1.44Mb USB 1-floppy emulator Goughs Tech Zone Comparing that to the review and testing of the Gotek, it seems likely that it uses the same method: Virtual Floppy Drive Part II Testing Gotek Fun with virtualization Bottom line there is that you will need a FAT thumb drive and either a second floppy emulator for your PC or the proprietary software in order to actually load any conpatible data onto the flash drive. It will only accept smaller drives (I think 2 gig or less) and must be formatted as FAT (16, though not labeled as such) rather than FAT-32 or NTFS. Worth a try, although it may not apply to your situation. Chip. Click on computer. You will see your usb as a device in the removable storage sector. Rufus ( Rufus - Create bootable USB drives the easy way ) is a good program for testing out various formatting options on a drive. The windows gui will only let you pick the file formats it thinks are your best options.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |